Verifying the EIGRP Configuration
There are a number of show and debug commands that can be used to configure, maintain, and troubleshoot a live EIGP network. The show commands are:
• show ip eigrp neighbors, which provides detailed information on the neighbors.
• show ip eigrp topology, which provides details about the routes held in the topology table and for detailed information on the networks that the router is aware of and the preferred paths to those networks, as well as the next logical hop as the first step in the path.
• show ip eigrp topology all, which provides details about all the routes and alternative paths held in the topology table.
• show ip eigrp traffic, which provides information on the aggregate traffic sent to and from the EIGRP process.
• show ipx route, which shows the routing table for IPX and is the source of the information on how to reach the remote destination network.
• show ip route, which provides detailed information on the networks that the router is aware of and the preferred paths to those networks.
• show ip protocols, which displays the IP configuration on the router, including the interfaces and the configuration of the IP routing protocols.